Rockwell Technology Partner Program

As a Rockwell Technology Partner, Aparian develops, distributes, and supports various innovative products that complement Rockwell Automation's products and solutions. Aparian products seamlessly integrate and operate with Rockwell Automation platforms, offering great ease of use, and allowing the customer to benefit fully from the partnership. 

The following products are part of Rockwell Automation's Technology Partnership Program:

 

 

Time Sync Router

The module is a stand-alone device allowing it to operate across various platforms. The module can also seamlessly connect and integrate with Rockwell Automation’s Allen Bradley equipment. The module can operate in either a Logix “owned” or standalone mode. In stand-alone mode the module can be configured and connected to an Ethernet network to accurately synchronize devices using 1588 PTP and NTP. With a Logix connection the input and output assemblies will provide timing, positioning, and diagnostic information which will be available in the Logix controller environment in addition to the PTP and NTP services.

Click here for more information.

Aparian Foundation Fieldbus Link
 

Foundation Fieldbus Link

The FF Link module simplifies the implementation of Foundation Fieldbus H1 on an Ethernet network including EtherNet/IP and Modbus TCP. The linking device includes an internal isolated power conditioner and bus terminator. It can interface up to 32 field devices.

The FF Link also supports, a Live Device List, Redundance and DLR, Alarm extraction, External Power conditioners, Device UDT Genereation, and asset management of slave devices using Device Type Managers (DTMs).

Click here for more information.

Profibus PA Link
 

Profibus PA Link

The PA Link module simplifies the implementation of PROFIBUS PA by combining an EtherNet/IP and ModbusTCP Linking device with an internal isolated power conditioner and bus terminator.

The PA Link can either operate as a PROFIBUS DPV0/DPV1 master allowing EtherNet/IPThe PA Link can either operate as a PROFIBUS DPV0/DPV1 master allowing EtherNet/IP devices (e.g. Rockwell Logix platforms) or Modbus devices to exchange process, alarming, and diagnostic data with PROFIBUS PA devices as well as provide parameterization and asset management of slave devices using Device Type Managers (DTMs).

Click here for more information.

ControlNet Router

The ControlNetRouter provides an efficient method of bridging ControlNet and Ethernet networks.

Uses include: Connecting ControlNet to Ethernet Interfaces, connecting Ethernet-only PanelViews to Logix via ControlNet, and programing Logix controllers via ControlNet.

The module supports both Scheduled & Unscheduled ControlNet modes.

Click here for more information.

DH485 Series B Router
 

DH485 Series B Router

The DH485 Router Series B provides intelligent data routing between EtherNet/IP and DH485 which can help simplify the migration from PLC5, and SLC systems to ControlLogix or CompactLogix platforms, where a DFH485 interface is required.

The DH485 Router can be used to replace the 1761-NET-AIC. 

Click here for more information.

IPPoint InTiny

IP Point HART In / Out​

The IP-Point-HART module can convert any analog device into either EtherNet/IP, Modbus-TCP,​​ or DNP3 TCP/UDP protocols. This includes 4 to 20 mA input and output devices with or without HART communications as well as 0 to 20 ma devices without HART.

The IP-Point-Hart is available in Input or Output variations:​

  • A-IP.HART-I for HART input devices like process instruments.
  • A-IP.HART-O for HART output devices like valve positioners.

The waterproof module is designed to screw directly into the HART field device simplifying installation. Power (24V) and Ethernet is connected to the device through the use of industry standard M12 connectors. The M12 connectors are supplied with the device and can be connected in the field.

The conversion to EtherNet/IP enables a HART device to be added directly into a Rockwell Automation Logix IO tree. The Modbus-TCP option enables a HART field device to be viewed as a Modbus Slave. The DNP3 option converts a HART field device into a DNP3 Outstation. The DNP3 option, also supports Secure Authentication, ensuring secure communications across the Ethernet network.

Click here for more information on the HART In.

Click here for more information on the HART Out.

Modbus Series B
 

Modbus Series B Router

The Modbus Router provides intelligent data routing between EtherNet/IP and Modbus (serial Modbus-RTU (RS232 & RS485) or Ethernet Modbus-TCP). The Modbus Router allows the user to integrate Modbus devices into a Rockwell Logix platform (e.g. ControlLogix or CompactLogix) with minimal effort.

The Modbus Router is able to transfer data from various Modbus devices to a maximum of three Logix controllers. The module operates in one of three modes, simplifying the configuration for all applications.

Click here for more information.

 

XPosition Module

The XPosition Module provides an interface to high accuracy positioning equipment which can be used across a range of position sensitive applications. Any third party Device can be interfaced to, provided it supports NMEA communications over Ethernet.

The XPosition module provides a method for connecting high precision GPS and inertial navigati​on devices to Rockwell Automation’s Logix (ControlLogix and CompactLogix) family of controllers.

Click here for more information.

Aparian DeltaV Scanner
 

DV Scanner

The Aparian DV Scanner enables the connection between a DeltaV™ M-series LocalBus and a Rockwell Automation ControlLogix or CompactLogix Controller.

The scanner supports up to 32 IO cards. AOIs are provided for standalone and redundant architectures. It also supports listen only and run mode.   

Click here for more information.

Aparian PMIO Scanner
 

PMIO Scanner

The 1756 PMIO Scanner enables a Honeywell TDC 3000®  PM/HPM/APM Input/Output Processors (IOPs) to be owned by a ControlLogix controller providing a seamless migration path to the Allen-Bradley ControlLogix platform from the legacy Honeywell TDC 3000® systems. The PMIO Scanner plugs directly into a ControlLogix chassis and connects directly into the TDC 3000® redundant I/O Link

The scanner supports up to 28 IOPs. Integration using AOP for easy of use. Supports multiple redundant architectures. Includes listen only and run modes.   

Click here for more information.

 

Gemlan Router

The GemLan Router provides intelligent data routing between either EtherNet/IP or AB Ethernet PCCC (e.g. PLC5 Ethernet communications) and the GEMLAN-D’s DecNet (Ethernet) network.

Click here for more information.

 

 

HDLC Router

The HDLC ​Router provides intelligent data routing between EtherNet/IP and HDLC (RS485) which can help the migration from GEM80 control systems to ControlLogix or CompactLogix platforms, where an HDLC interface is required.

Click here for more information.

Save
Cookies user preferences
We use cookies to ensure you to get the best experience on our website. If you decline the use of cookies, this website may not function as expected.
Accept all
Decline all
Analytics
Tools used to analyze the data to measure the effectiveness of a website and to understand how it works.
Google Analytics
Accept
Decline
Essential
Needed by site
Aparian
Accept
Marketing
Set of techniques which have for object the commercial strategy and in particular the market study.
Quantcast
Accept
Decline
Unknown