Multi-Slave and SLC/MicroLogix support for Modbus Router
The Aparian Modbus Router has been updated to support multiple nodes in Slave mode allowing the user to emulate multiple Modbus devices with a single Modbus Router. The module now also supports interfacing Modbus devices with SLC/MicroLogix controllers in both Master and Slave modes.
DNP3 Router supports repeater functionality
The DNP3 Router now supports the ability to repeat DNP3 messages enabling the user to create a radio network over a wider area.
Solutions for PanelView Plus on DF1, DH485, and DeviceNet
Aparian provides solutions for connecting the new PanelView Plus series (which is an Ethernet only device) to DF1, DH485, and DeviceNet modules. This will allow the user to interface the latest PanelView Plus devices to older non-Ethernet based devices (eg. DF1 for SLC5/05, DH485 for SLC5/03, DeviceNet for 1771-SDN, etc.)
DNP3 Support for Micro M850
The Aparian DNP3 Router can be used with a Micro M850 Controller to operate as a DNP3 Outstation RTU. Example code and a specific Application Note can be found on the Product Page.
PTP Grand Master Clock
The Aparian Time Sync module is an out-of-rack PTP Grand Master Clock. Giving it the ability to provide accurate time to any PTP or NTP client. The out of rack feature enables the module to be mounted close to the antenna, eliminating the need for expensive low loss coaxial cable. See Time Sync Module. The Time Sync Module can also be added to the IO tree in Rockwell's Logix Controllers or used to synchronize Modbus devices.